![]() As of now, this configuration cannot be done in the VMWare Workstation GUI and it does not work for all physical interfaces. The Allegro Virtual Edition will analyze all traffic received by this network port.Įnable the promiscuous mode for the second port if you would like to analyze all incoming packets. The first port is used for Management, the second is used as capture port. The Allegro Virtual Edition has by default 2 network interfaces. The startup is identical for ESXI and Workstations. Select a “Feitian HID Dongle” or similar.įollow the VMWare ESXI Installation Guide#Initial startup. When powered off, edit the settings of the Allegro Virtual Edition and add the USB dongle to it. The dongle must be connected to the Allegro Virtual Edition. If the Allegro Virtual Edition was shipped with an USB License dongle, plug the dongle into an unused USB port of the VMWare host. You can also change the settings later at any time. You can change the first port to NAT to allow only access from your local PC. By default, both ports are bridged to your local network. The Allegro Virtual Edition analyzes all traffic on this network port. The second network port is used as a data plane. Note that the first interface is used for Management access and requires a network with a DHCP server. Once this is complete, you can edit the settings of the Allegro. The Allegro Virtual Edition will be imported. Next, specify the location on your disk, set a name and import the Allegro Virtual Edition. Import the VM with “Open Virtual Machine” and select the "allegro-multimeter.ovf" file from the extracted zip archive. It should contain the 3 files “allegro-multimeter.ovf”, “allegro-multimeter.vmdk” and “allegro-multimeter-virtualbox.ovf”.Īllegro Virtual Edition deployment to VMWare Workstationĭownload, install and Open VMWare Workstation (see ): at least 2GB RAM for the In-Memory-DB, the larger the betterĪllegro Virtual Edition installation imageĬontact Allegro or your reseller to download the current Allegro Virtual Edition installation zip archive.Įxtract the zip archive.x86 64-Bit Intel/AMD CPU with SSE4.2 support (since 2011).The system requirement of the virtual machine is: Please review the License restrictions of the VMWare Workstation Player. ![]() ![]() Note that the non-commercial version (VMWare Workstation Player) also works with the Allegro Virtual Edition if you are testing it for personal use only. This Guide requires a VMWare Workstation Player or Pro. It is recommended to use one or more dedicated HDDs or SSDs for the ring buffer to prevent side effects to other VMs. 6 Encapsulated remote mirroring (元) sourceīe aware that an activated ring buffer can degrade the I/O performance for all VMs.2.2 Allegro Virtual Edition deployment to VMWare Workstation.1.3 Allegro Virtual Edition installation image. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |